EZ Blocker 2.0

$40.00

The EZ Blocker 2.0 just might be the perfect solution for your granny square blocking challenges!

Made from solid red oak, the EZ Blocker 2.0 can block squares from as little as 3″ up to 8″ (in one inch increments) and will position you as a great Granny Square Crocheter!  It comes with 18 4″ pins made from metal (not 1/4″ dowels that is presented as the prevalent solution!).  It might well be the perfect solution for your granny square challenges!  The backside is fully felted so as to protect any and every surface that you are using it upon.  The pins are about 60% smaller than 1/4″ dowels, saving your work from unnecessary stretching and pulled corners.

Finally, the EZ Blocker 2.0 is finished in a minimum of four coats of polyurethane so you can mist your products, the pins and the board wit the confidence that it will likely last a lifetime!

If you’ve been considering purchasing a solution to your granny square blocking challenges…  We urge you to consider the EZ Blocker 2.0!  We’re confident that you will find the product performance everything that you might hoped that it would be!

The  EZ Blocker 2.0 – New From Chetnanigans!

If you were a fan of our original EZ Blockers, we have great news for you!  We’ve introduced a new, replacement model, The EZ Blocker 2.0!

As we’ve learned more about our customers, we’ve seen an increased desire for folks to have the capability to block all four sides of their squares, not just the four corners.  The new EZ Blocker 2.0 features many of the same characteristics that made our original blocker so popular, but we’ve improved on it in several ways!

Starting with the board itself, you can block from 3” to 8” squares, all in 1” increments.  Next, we’ve improved on the pins that ship with the board…  We are now using the same small, metal, polished pins across our entire offering of Blocking Boards.  Some of our competitors are using ¼” dowels as pins, but these are over twice the thickness of our pins!  Larger pins stretch your corners, poke holes throughout the sides of your squares, and are generally more difficult to manage.  And we give you plenty of pins to manage your project, 18 four inch pins ship free with the EZ Blocker 2.0!  And if you want more or different sized pins, be sure to see our Replacement Pins Listing!  2”, 4” or 6” pins are available to our EZ Blocker customers for a small / reasonable fee.

Next, we now offer holes on all four sides of each square, from 3” to 8”.  Each square now can be blocked with a minimum of 4 pins per side.  We’ve retained the minimum four coats of Polyurethane on each blocker to assure that your misting will have no effect on the board or pins!  Each hole is drilled three times – once as a very small pilot hole to guarantee proper placement, a second time to drill the hole to the proper size, and the third time after the poly is dried to assure you that each pin will fit properly in each and every hole on the blocker board.

Finally, the EZ Blocker 2.0 is fully covered with felt on the backside to assure that any surface that you use your blocker on retains it shine while avoiding scratches.

So if you’ve been considering a Blocking Board to improve the look and performance of your Granny Squares, look no further than our EZ Blocker 2.0!  It just might be a perfect solution for you!  And, as with all of Chetnanigans’ products, the EZ Blocker 2.0 is made with care, consideration to detail right here in our little shop in Midlothian. VA. Thanks for considering and we’re confident that you would love this addition to your crochet accessory collection!

Weight 1.2 lbs
Dimensions 9 x 9 x .5 in

Reviews


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.